Gravimetric Diluters
Dilumat 3mk2
Features
Dilumat 3mk2
Manual dilution of bulk samples is often a tedious and inaccurate process. The technician must weigh a precise amount of sample and dispense a precise amount of diluent to ensure the desired final dilution is accurate. The Dilumat fully automates this process by accurately dispensing a volume of diluent based upon the desired final dilution and the weighing of sample to be diluted. The technician selects the desired final dilution ratio, adds sample into a bag or container on the Dilumat load cell (minimum weight can be programmed) and initiates the dilution cycle. A peristaltic pump dispenses diluent into the sample until the set dilution ratio is obtained. Dilumat offers superior speed and accuracy to the sample preparation process relative to manual methods.
Dilumat 3mk2 Features
-Accurate, repeatable to within 0.1g of sample weight.
- Fast dilution time: 20 seconds for 225ml
-Automatic calibration (no time-consuming daily calibration required)
- Simply press the arm down to start the dilution process
-User friendly, microprocessor controlled, will remember last used parameters
-Automatic tare of the balance
-Optional bar code printer
-Splash-proof design
-Easy to clean
-Second pump option
-Automatically stops when diluent has run out
-Sturdy construction for accurate weighing capabilities.
Dilumat3mk2brochurenew (Specs
| Dilumat 3mk2 | |
| Power Supply: | 115 volts +/- 10% (50-60Hz) |
| Dilution time for 225g | 20 seconds (complete weighing, dilution, and storing) |
| Dilution Factor: | 1:2 to 1:50 |
| Sample size: | 3g to 1500g |
| Weighing Accuracy: | 0.1g |
| Dilution Accuracy: | 0.5% to 1% depending on intial weight |
| Automatic Tare |
from 0 to 1000g |
| Dimensions: | 400 x 400 x 500 mm (L x W x H) |
| Weight: | 11kg |
| Standard bag size: | 400ml |
Accessories
Accessories
|
Second pump unit Allows you to pump from two different diluents. |
 |
|
|
|
| Epson LX300 Printer
Allows for the printing of date, time, operator, sample weight, total weight and dilution factor onto duplicate labels; one for your records and one for the sample bag. Connects to the Dilumat via RS232. |
 |
|
|
|
| Megatron Star Printer
Small-sized unit; Allows for the printing of date, time, operator, sample weight, total weight and dilution factor. Connects to the Dilumat 3mk2 via RS232. |
|
|
|
|
| Beaker holder
Flat, circular support tray for measuring diluent into beakers/ flasks instead of bags. |
|
Related Products
 |
Fully automated media sterilizers with active cooling; provides rapid cycle times for busy laboratories. Available in 12, 25, 40, 70 and 110 liter sizes. Features include fully programmable microprocessor controlled operation, rapid dispense capability,... |
 |
Microprocessor controlled media sterilizer; available in 9 and 28 liter sizes. Real time cycle print out via optional ticket printer, dispensing via peristaltic pump, supplement addition port, magnetic stirrer.... |
 |
Interface seamlessly with XY500 tube/bottle filler (highest capacity) 20 user definable programs including calibration values Anti drip feature for tube filling Reversible pump direction Small foot print Can accommodate various tubing sizes from 1.6-... |
